Welcome to the Fleshlight Forums.
Page 1 of 2 12 LastLast
Results 1 to 50 of 56
  1. #1
    FLight Captain
    Join Date
    Jan 2009
    Location
    Tantra Labs
    Posts
    1,083

    Exclamation Video: Homemade Fleshlight Warmer

    Video: Homemade Fleshlight Warmer

    [url]http://www.youtube.com/watch?v=rJEmF5aGjFg[/url]


    Materials

    Vicks Personal Steam Inhaler Model V1200

    3 1/2 inch PVC pipe 4 inches long

    1/2 inch PVC pipe 1 inch long


    Note: All credit goes to FL_LUVR who created the video

  2. #2
    FLight Captain
    Join Date
    Jan 2009
    Location
    Tantra Labs
    Posts
    1,083

    Default Re: Video: Homemade Fleshlight Warmer

    I have not put this to the real world test yet

    Amazon has the inhaler for $19.99

    Went to Home Depot and they did not have 3 1/2 inch PVC pipe

    FL_LUVR any comments since your original post?

  3. #3
    FLight First Officer
    Join Date
    Jan 2008
    Posts
    547

    Default Re: Video: Homemade Fleshlight Warmer

    That looks pretty spiffy! I may try that out if I got some extra money on hand, nice find.

  4. #4
    FLight Captain
    Join Date
    Dec 2007
    Location
    Niagara Falls, Canada
    Posts
    2,841

    Default Re: Video: Homemade Fleshlight Warmer

    Really good idea, I may try this one, and I like it because there's no major modifications needed to the heating unit.

  5. #5
    FLight Navigator
    Join Date
    Nov 2007
    Posts
    233

    Default Re: Video: Homemade Fleshlight Warmer

    Brilliant!

    Simple, elegant, beautiful, powerful.

    Let us know how the testing goes.

  6. #6
    FLight Navigator
    Join Date
    Oct 2006
    Location
    Netherlands
    Posts
    198

    Default Re: Video: Homemade Fleshlight Warmer

    Tantramagnet you deserve a 2009 award in innovation how to warming up the Fleshlight.
    One of the best postings this year. I'm try it out.

  7. #7
    FLight Captain
    Join Date
    Jan 2009
    Location
    Tantra Labs
    Posts
    1,083

    Default Re: Video: Homemade Fleshlight Warmer

    I could not find any 3 1/2 inch PVC

    I went to Lowes Hardware and bought a 1/2 inch PVC Coupling 1 1/2 inches long

    And a 3 inch PVC Female Adapter 2 1/2 inches long

    Which is 3 1/2 inches wide on top and 3 1/4 inches wide on bottom

    I bought 2 which stack on top of each other

    A 3 to 4 inch PVC Adapter may also work

    PVC fittings should eliminate the step of having to cut pipe

    Will report back in a week with real world feedback


    1/2 inch PVC Coupling



    3 inch PVC Female Adapter


    3 to 4 inch PVC Adapter

  8. #8
    FLight Navigator
    Join Date
    Aug 2008
    Posts
    118

    Default Re: Video: Homemade Fleshlight Warmer

    Perfect for those chilly mornings.

  9. #9
    FLight Navigator
    Join Date
    Feb 2009
    Posts
    158

    Default Re: Video: Homemade Fleshlight Warmer

    It sounds great can't wait for the feed back on the tests.

  10. #10
    FLight Captain
    Join Date
    Jul 2008
    Location
    USA
    Posts
    1,637

    Default Re: Video: Homemade Fleshlight Warmer

    Hey Fleshlight Kid I like the crotch shot of that blonde in your avatar. She looks quite edible.

  11. #11
    FLight Navigator
    Join Date
    Feb 2009
    Posts
    158

    Default Re: Video: Homemade Fleshlight Warmer

    Quote Originally Posted by LadyIceMan View Post
    Hey Fleshlight Kid I like the crotch shot of that blonde in your avatar. She looks quite edible.
    Thanks Lady Ice Man it's the FLG Paris I just love her she's fine.

  12. #12
    FLight Captain
    Join Date
    Jan 2009
    Location
    Tantra Labs
    Posts
    1,083

    Default Re: Video: Homemade Fleshlight Warmer

    Video: Homemade Fleshlight Warmer

    [url]http://www.youtube.com/watch?v=rJEmF5aGjFg[/url]


    Real World Test Flight

    This is an alternative way to warm up a Fleshlight sleeve than the traditional way of soaking it in warm water. It produces a deeper and longer lasting warmth than soaking it in warm water. It also uses less water and requires no tools for assembly. I now find this the only way to warm a Fleshlight.


    Materials

    Vicks Personal Steam Inhaler Model V1200 - $20.00 to 30.00 - Drug Store or Internet

    1/2 Inch PVC Plastic Pipe Coupling 1 1/2 Inches long - $00.25 - Hardware Store

    3 Inch ABS Plastic Pipe Coupling 3 Inches long - $2.00 - Hardware Store


    Instructions

    Remove top inhaler unit from inhaler

    Plug inhaler into wall outlet and fill with warm water

    Place 3 Inch ABS Plastic Pipe Coupling on top of inhaler

    Remove top cap of Fleshlight and insert 1/2 Inch PVC Pipe Coupling into Fleshlight sleeve opening

    Remove end cap of Fleshlight and place Fleshlight face down on top of 3 Inch ABS Plastic Pipe Coupling

    Turn on inhaler and set a clock timer alarm for 4 minutes

    After 4 minutes, the Fleshlight is very warm and ready to use after applying lube

    Warning: Always test for warmth level by inserting finger into Fleshlight sleeve opening before use


    Note: All credit goes to FL_LUVR who created the video

    The 3 1/2 Inch PVC Pipe mentioned in the video is actually labeled as 3 Inch in the hardware store, but measures 3 1/2 Inches. Using a coupling saves you the step of having to saw pipe.


    Vicks Personal Steam Inhaler Model V1200


    1/2 Inch PVC Plastic Pipe Coupling


    3 Inch ABS Plastic Pipe Coupling

  13. #13
    FLight Captain
    Join Date
    Mar 2009
    Location
    USA
    Posts
    2,189

    Default Re: Video: Homemade Fleshlight Warmer

    I want one =( that looks kick ass =) thx for sharing =P ... this would make it easier for those late night FLights when you dont want to wake the house to run the water til its hot

  14. #14
    FLight Navigator
    Join Date
    Jul 2003
    Location
    In my room FL-ing !
    Posts
    204

    Default Re: Video: Homemade Fleshlight Warmer

    Glad to see the forum is keeping my idea alive. Originally had it hosted on Rapidshare until they pulled it for some reason.

  15. #15
    FLight Captain
    Join Date
    Jan 2009
    Location
    Tantra Labs
    Posts
    1,083

    Default Re: Video: Homemade Fleshlight Warmer

    Quote Originally Posted by FL_LUVR View Post
    Glad to see the forum is keeping my idea alive. Originally had it hosted on Rapidshare until they pulled it for some reason.
    FL_LUVR you are the man!

    Your idea is a total game changer!

  16. #16
    FLight Navigator
    Join Date
    Jun 2009
    Posts
    122

    Default Re: Video: Homemade Fleshlight Warmer

    I've been using a pyrex dildo with pretty good success. Just pop it in the microwave, make sure its not too hot, and put it in the FL for a min or two. It cost me like $20 on Ebay.

  17. #17
    FLight Navigator
    Join Date
    Nov 2007
    Posts
    233

    Default Re: Video: Homemade Fleshlight Warmer

    Just assembled and examined the materials listed from tantra magnet's post(3 in. abs coupling, 1/2 in pvc coupling, v1200 steam inhaler, got the piping from home depot, the inhaler from cvs) looks like everything fits perfectly like they were meant for each other, going to try it now.

  18. #18
    FLight Navigator
    Join Date
    Nov 2007
    Posts
    233

    Default Re: Video: Homemade Fleshlight Warmer

    Bad news, one of my friend's used the steam heating method as well, and reported damage after leaving his fleshlight on the device for only about 7 minutes. He reported the entrance looked way looser and there was a slight tear near the entrance.

    Upon closer inspection, my sleeve looks slightly looser as well.

    Going to return the steam heaters and get some new sleeves.

  19. #19
    FLight Captain
    Join Date
    Jan 2009
    Location
    Tantra Labs
    Posts
    1,083

    Default Re: Video: Homemade Fleshlight Warmer

    Quote Originally Posted by flyer47 View Post
    Bad news, one of my friend's used the steam heating method as well, and reported damage after leaving his fleshlight on the device for only about 7 minutes. He reported the entrance looked way looser and there was a slight tear near the entrance.

    Upon closer inspection, my sleeve looks slightly looser as well.

    Going to return the steam heaters and get some new sleeves.

    Bummer, sorry to hear to that

    As I mention in the instructions, I use a timer to alert me after 4 minutes

    After 4 minutesi I remove the FL from the warmer

    I've had zero damage to the sleeve and it works perfect

    The coupling is pre-cut at 3 inches which puts it closer to the warmer

    This could be a factor plus keeping it on the warmer longer than 4 minutes

    FL_LUVR who made the video recommends cutting pipe 4 to 6 inches

    Using a timer to remove the FL is the solution

    ILF needs to make a custom warmer with a auto-shutoff

  20. #20
    FLight Captain
    Join Date
    Jan 2009
    Location
    Tantra Labs
    Posts
    1,083

    Default Re: Video: Homemade Fleshlight Warmer

    Another solution is simply to stack two 3 Inch Plastic ABS Pipe Couplings on top of each other.

    This will put the FL 6 inches above the steam heat reservoir

    Don't forget to set a clock timer for 4 minutes to remind you to remove the FL after 4 minutes

    I still feel this is a fantastic way to warm a FL
    as long as it's done properly

  21. #21
    FLight First Officer
    Join Date
    Aug 2008
    Posts
    860

    Default Re: Video: Homemade Fleshlight Warmer

    Just wanted to bump this up. Has anyone else tried this? I don't normally heat my FLs but this seems like a pretty good method.

  22. #22
    FLight Captain
    Join Date
    May 2007
    Posts
    2,526

    Default Re: Video: Homemade Fleshlight Warmer

    Though I've not tried the above idea, I will say that I cannot recommend enough the idea of using a "Peet Boot Dryer"....and being ILF has nothing related to it [URL]http://www.peetshoedryer.com/[/URL] .

    Basically, just take the FL in the case. slip it in the tube it making a great seal simply due to the sizes (and yes checked) and viola, a "dry" system to either dry your FL, or gently warm them till toasty if left on there. It is so gentle I've left soaking wet leather gloves on it for a month, and though dry in a couple hours they never hardened (like leather does)......So it's a very low temperature heat that works on volume of BTU's vs. intensity.

    Best of all I'm betting you could leave a FL on there 24/7/365, the only thing you might want to add would be a small tube (perhaps 1/2" I.D.) to help keep the orifice open........More so, if not using it for your FL's it could be used as it's supposed to as I've found no better way to safely dry sweaty to even soaked boots/shoes/waders/gloves.....In fact I leave my hunting boots on mine 365 days a year........and its been on/plugged in for what turns out to be over 12 years (thought it was 10 in another thread yet did the math).......and is still working like gangbusters.

    K2

  23. #23
    FLight First Officer
    Join Date
    Aug 2008
    Posts
    860

    Default Re: Video: Homemade Fleshlight Warmer

    Wow the peets shoe dryer seems pretty cool, how much do they run?

  24. #24
    FLight Captain
    Join Date
    May 2007
    Posts
    2,526

    Default Re: Video: Homemade Fleshlight Warmer

    Depends, as you can find them on sale so I'd guess between $25-40 and from most hunting/fishing/general outdoors stores possibly even general merchandizers...Cabala's naturally one most might know...they have a list here [URL]http://www.peetshoedryer.com/buy.html[/URL] .........Seems pricey, yet once again, 24/7/365/12 years non stop.....Deffinitely have gotten my monies worth and why we have I'd guess 8+ of them around here....Also, no fans, is silent.

    K2

  25. #25
    FLight Navigator
    Join Date
    Mar 2008
    Posts
    337

    Default Re: Video: Homemade Fleshlight Warmer

    Quote Originally Posted by TantraMagnet View Post
    Video: Homemade Fleshlight Warmer

    [url]http://www.youtube.com/watch?v=rJEmF5aGjFg[/url]


    Materials

    Vicks Personal Steam Inhaler Model V1200

    3 1/2 inch PVC pipe 4 inches long

    1/2 inch PVC pipe 1 inch long


    Note: All credit goes to FL_LUVR who created the video
    As has been noted in this thread the technique is not safe. It may work but it has apparently damaged inserts. Here is a comment right from the youtube page :

    "I tried this tonight and it melted my fleshlight in only 6-7 minutes. Now I have to buy a brand new one. Be very, very careful"

  26. #26
    FLight First Officer
    Join Date
    Aug 2008
    Posts
    860

    Default Re: Video: Homemade Fleshlight Warmer

    I know the youtube comments kinda made me concerned. I usually take these comments with a grain of salt, as the vid said it should warm it up in only 4 mins.

    I normally don't care to warm up my toys cause I hate waiting for hot water or heating pads to work, but this seems pretty quick and easy.

  27. #27
    FLight Captain
    Join Date
    Jan 2009
    Location
    Tantra Labs
    Posts
    1,083

    Default Re: Video: Homemade Fleshlight Warmer

    Quote Originally Posted by jhopper View Post
    As has been noted in this thread the technique is not safe. It may work but it has apparently damaged inserts. Here is a comment right from the youtube page :

    "I tried this tonight and it melted my fleshlight in only 6-7 minutes. Now I have to buy a brand new one. Be very, very careful"
    You will not have a problem if you follow the above instructions exactly!

    If you use a 3 Inch Length Coupling you will need to remove the Fleshlight 4 minutes after turning on the warmer. So use a clock timer to remind you to remove it.

    You can also stack two 3 Inch Length Couplings on top of each other creating a 6 Inch distance between the FL and warmer.

  28. #28
    Banned
    Join Date
    Oct 2005
    Location
    Out West
    Posts
    3,177

    Default Re: Video: Homemade Fleshlight Warmer

    I just fuck Chantelle cold. I find my strokin' heats her up quickly enough. Not gonna risk meltin' my Fleshy...

  29. #29
    FLight First Officer
    Join Date
    Aug 2008
    Posts
    860

    Default Re: Video: Homemade Fleshlight Warmer

    Quote Originally Posted by TantraMagnet View Post
    You will not have a problem if you follow the above instructions exactly!

    If you use a 3 Inch Length Coupling you will need to remove the Fleshlight 4 minutes after turning on the warmer. So use a clock timer to remind you to remove it.

    You can also stack two 3 Inch Length Couplings on top of each other creating a 6 Inch distance between the FL and warmer.
    Thanks I was waiting for you to reply. I imagine the guys that posted those weren't using the couplings and left them on there to long.

  30. #30
    FLight First Officer
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    946

    Default Re: Video: Homemade Fleshlight Warmer

    Looks like a nice setup

  31. #31
    FLight First Officer
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    946

    Default Re: Video: Homemade Fleshlight Warmer

    Quote Originally Posted by K2 View Post
    Depends, as you can find them on sale so I'd guess between $25-40 and from most hunting/fishing/general outdoors stores possibly even general merchandizers...Cabala's naturally one most might know...they have a list here [URL]http://www.peetshoedryer.com/buy.html[/URL] .........Seems pricey, yet once again, 24/7/365/12 years non stop.....Deffinitely have gotten my monies worth and why we have I'd guess 8+ of them around here....Also, no fans, is silent.

    K2
    The problem with the boot dryers is that they don't get very hot, warm but not hot

  32. #32
    FLight Captain
    Join Date
    May 2007
    Posts
    2,526

    Default Re: Video: Homemade Fleshlight Warmer

    Quote Originally Posted by Balls_To_The_Walls View Post
    The problem with the boot dryers is that they don't get very hot, warm but not hot
    Well, they actually work on a very different principal then most consider....A million gallon oil tank burning might be at only 500F, yet you can't get within 300 yards of it.....A blow torch may be burning at 2,000F, and you can get within an inch.

    Same with the boot dryer and a lot of electric heaters now a days, they work off of a high BTU/low temp concept, IOW volume exceeding intensity.

    Now real world that translates into soaking that FL in heat and really bringing it up safely to a safe temperature....Normally soaking it in a sink of 165F water, it takes a couple of fillings as the water cools via the air and the sink itself...YET...due to the rapid heating it loses its temperature quickly (within a couple minutes and is much too hot within a few seconds).......So, the boot dryer will heat the FL through yet at a modest temperature....What temp?....Well wearing very thick wool socks my loose boots feel very hot to me, feet less sensitive then your dick (I hope) and are designed to pull heat away (so cool quickly) which a FL is not.

    Tell you what, I'll do a real test this weekend with a victim....err....test subject. Including getting his cock right in there and shoving a thermometer between the two

    K2

  33. #33
    FLight First Officer
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    946

    Default Re: Video: Homemade Fleshlight Warmer

    Maybe it's just my brother, he has a Peet and it doesn't feel very warm

  34. #34
    FLight Captain
    Join Date
    May 2007
    Posts
    2,526

    Default Re: Video: Homemade Fleshlight Warmer

    Quote Originally Posted by Balls_To_The_Walls View Post
    Maybe it's just my brother, he has a Peet and it doesn't feel very warm
    Put a pair of boots on em overnight then tell me next morning

    Once again, it's a low-high volume heat, not an high-low volume heat.

    K2

  35. #35
    Banned
    Join Date
    Oct 2005
    Location
    Out West
    Posts
    3,177

    Default Re: Video: Homemade Fleshlight Warmer

    Quote Originally Posted by K2 View Post
    Tell you what, I'll do a real test this weekend with a victim....err....test subject. Including getting his cock right in there and shoving a thermometer between the two

    K2
    Holy shit! Don't use a glass one. It could break if inserting bends it too much. Then we'll have a bleeding erection on our hands...

  36. #36
    FLight Navigator
    Join Date
    Jul 2008
    Posts
    165

    Default Re: Video: Homemade Fleshlight Warmer

    Quote Originally Posted by K2 View Post

    Tell you what, I'll do a real test this weekend with a victim....err....test subject. Including getting his cock right in there and shoving a thermometer between the two

    K2
    K2 We await your test reults. xD

  37. #37
    FLight Attendant
    Join Date
    Aug 2009
    Posts
    2

    Default Re: Video: Homemade Fleshlight Warmer

    Wow this is a great post. I work for a plumbing wholsaler here in the central u.s. Insted of using a 1/2 inch pvc coupling try using a 1/2 inch cpvc coupling, it's quite a bit smaller than the regular pvc. That way we could all avoid stretching out our fleshlight. good night all and to all a fleshlight

  38. #38
    FLight Captain
    Join Date
    May 2007
    Posts
    2,526

    Default Re: Video: Homemade Fleshlight Warmer

    Didn't have time over the weekend, will test it today.....Just put the FL in it, so marking the time as 6:50AM.

    K2

  39. #39
    FLight Captain
    Join Date
    May 2007
    Posts
    2,526

    Default Re: Video: Homemade Fleshlight Warmer

    Okie dokie.....2:45 let the testing begin.

    1. Test victim....err...subject "David", 29 year old male, 5'-11", 185#, healthy, Blonde hair, Blue eyes, nice ass...err ...buttocks, athletic build, has not orgasmed in 2 days, sober (so clearly mentally handicapped to let me do this).

    2. Fleshlight, Pink, Lady orifice, Vortex texture, Black case.

    3. The Fleshlight at 6:50 AM simply had the end caps removed, and the small end was slipped into one of the 2, 24/7/365/12 year running Standard Peet Boot Dryer tubes (large/orifice end up), a cardboard coathanger tube placed in the orifice to keep it open, and a paper lunch bag placed over all of that (to keep the heat in), no sandwich contained, not even a pickle it already eaten......So heated for the first time for 7 hours 55 minutes (the intention being to never remove it).

    4. Core temperature 2" into the back end of the FL insert material (probe driven into the material itself evenly surrounding it), Reading: 104.0 Degrees Fahrenheit.

    5. Core temperature 2" into the orifice end of the FL insert material (probe driven into the material itself evenly surrounding it), Reading: 104.0 Degrees Fahrenheit.

    6. Re-Heat of FL for 5 minutes.

    7. Temperature 4" into the texture canal of the FL insert, ends sealed by pinching them shut, Reading: 104.0 Degrees Fahrenheit.

    8. Re-heat of FL for 5 minutes.

    9. Core temperature 3" into the back end of victim...err subject (David) (Probe covered in a rectal thermometer condom....could of done it in his mouth yet I deserve my jollies too, though granted it took a few "just lay there and shut-up"s and a minor amount of pinning....Subject complained, muttered, squirmed), Reading: 98.1 Degrees Fahrenheit.

    10. Surface temperature of subject's (David's) cock and balls (stuck it between them and squeezed....Subject scoweled, said he was not having fun), Reading: 82.4 Degrees Fahrenheit.

    11. Lubricant (GunOil H2O) temperature: 70.2 degrees farenheight.

    12. Using GunOil H2O began lubricating Guinea Pig's (David's) cock in base to tip swirling strokes at roughly 20 S.P.M. (strokes per minute) utilizing an overhand, then underhand counter rotating two-handed motion. Subject fondled the technician's boobs (mine), then the subject requested vaginal intercourse by stating "lets fuck instead", and was refused. Subject pouted, and was told to quit whining. Victim became fully erect in approx. 3 minutes.

    13. Measured subjects cock. Length about radius (having a slight upward curve): 7.81", Circumference at thickest point (base): 6.13", Circumference at thinnest point (just under head): 5.88". Subject complained again. Technician informed him he could either keep stroking it (his cock) to keep it hard, or the deal was off. The subject muttered, and kept stroking.

    14. Subject was sat in a chair, knees approx. 3' apart, and the temperature probe was placed against the underside of his cock, and the Fleshlight was secured, canal end end cap placed on, then was slipped down fully onto the subjects pee-pee (was getting tired of the whining), till set flush to his pubic mound.

    15. Fleshlight and cock remained static for 30 seconds. Reading: 103.4 Degrees Fahrenheit.

    16. Gently, at approx. 6 S.P.M. the Fleshlight was worked by the technician in a linear up and down fashion for approx. 2 minutes with the probe in place. Reading: 102.9 Degrees Fahrenheit.

    17. Probe was removed, and rapidly approx. 30 S.P.M. in a 90 degree twisting yet linear motion the Fleshlight was worked up and down the subject for approx. 1 minute 45 seconds. Subject complained he was about to orgasm. Probe was re-inserted and the Fleshlight seated flush as before static during reading. Reading: 103.3 Degrees Fahrenheit.

    18. The Fleshlight was removed from the subject. The probe was pulled away from the subject and set to the side. The technician laid on her back upon the fur rug and parted her legs. The technician then informed the subject he may now perform vaginal penetration till orgasm ("Okay dave, now fuck me!).

    19. Subject ejaculated in approximately 1 minute 45 seconds (+/-30 seconds).

    20. Subject was informed he was to get off the technician as he was squishing her. Subject extracted himself with a grunt, pouted, asked if the testing was over ("are you kidding, that's all we're going to do?"), and was escorted to the door by the technician so she could clean up.


    Conclusions:

    The Peet Boot Dryer in roughly 8 hours evenly heated the Fleshlight to a uniform material temperature of 104F.. Not just a surface temperature wherein the cooler inner material and surrounding cold air cools it quicker, yet the entire unit causing it to retain its temperature for the entire session. Friction from use quickly began to make up for any loss.

    In contrast soaking the insert AND lubricant in hot water (165F.) over the course of 15 minutes caused an inconsistant surface temperature that was at times cool, others uncomfortably hot. However, tended to cool off rapidly as well the core temperature of the material and cool air between the case and insert taking it's toll at times.

    Summation:

    It's like fucking some tight, whet hottie with soft skin (as you don't have to wash off the cornstarch) that has a fever yet wants you to bang her hard and cum deep inside her anyway.

    K2

  40. #40
    FLight Captain
    Join Date
    May 2007
    Posts
    2,526

    Default Re: Video: Homemade Fleshlight Warmer

    Oh and BTW......

    Had to take this out in the cabin on it's Peet Dryer. Swapped out my hunting boots for some of my shoes I figured some of you would prefer, and don't mind the discoloration of the tubes, is from 12 years of smoke.



    K2

  41. #41
    FLight Attendant
    Join Date
    Jul 2007
    Posts
    17

    Default Re: Video: Homemade Fleshlight Warmer

    So is there a time limit on warming it up? Does it have to be heated for 7 hours by the Peet dryer.

  42. #42
    FLight Captain
    Join Date
    May 2007
    Posts
    2,526

    Default Re: Video: Homemade Fleshlight Warmer

    Quote Originally Posted by mattevil View Post
    So is there a time limit on warming it up? Does it have to be heated for 7 hours by the Peet dryer.
    Well it would very likely take some time to reach the peak temperature of 104F. Whether 3 hours, or 8 hours I can't say.....However, I'm betting you could leave the FL there 24/7/365.....In kind that would keep it dry, so mold/fungus free.

    The only negative may be that constant exposure to such temperatures might cause the material to leech out some of it's compounds. As to that I have no idea, would have to be something for ILF to tell us, or through someone testing one.

    K2

  43. #43
    FLight Attendant
    Join Date
    Apr 2010
    Posts
    4

    Default Re: Video: Homemade Fleshlight Warmer

    Am I the only person that this doesn't really work for?

    My LL SIAC will only stay warm (and that's at the first couple of inches) for about 30-60 seconds.

  44. #44
    FLight First Officer
    Join Date
    Mar 2010
    Posts
    553

    Default Re: Video: Homemade Fleshlight Warmer

    I didn't know anything about this FL. warmer.Great info ! Maybe I'll buy it soon..Just to try it

  45. #45
    FLight Attendant
    Join Date
    Mar 2010
    Posts
    69

    Default Re: Video: Homemade Fleshlight Warmer

    Not sure how well that works, but I found THIS: http://www.youtube.com/watch?v=BzHCDknFbDU&feature=related

  46. #46
    FLight Attendant
    Join Date
    Mar 2010
    Posts
    18

    Default Re: Video: Homemade Fleshlight Warmer

    No offense to K2, your testing procedure was incredibly in-depth. I actually am sold on it as of right now and will be ordering one when I make it back home after the holidays, however mattevil, had a good point and I would like to see this tested as well, maybe by now since it's been sometime since reposted for a follow up, maybe you have some more in-depth perspective about the warmer. I ordered the new all ways pack for Tori Black and would love if I could just keep this at the ready so that I could just start FLying first thing in the morning or after a really long day at work? So since it has been more than a year K2, have you found that you can keep this on 24/7/365, without the FL losing it's tightness? Please respond so I can start a warmer FLight process!

    Crazy

  47. #47
    FLight First Officer
    Join Date
    Jun 2010
    Posts
    850

    Default Re: Video: Homemade Fleshlight Warmer

    This looks useful...

  48. #48
    FLight Attendant
    Join Date
    Dec 2010
    Posts
    37

    Default Re: Video: Homemade Fleshlight Warmer

    Does that peet warmer really work?

    Can you just leave it on all night long and not melt your fleshlight? Which gives it a prolonged above body degree temp?

    If this is true - tell me which model to get, lol

  49. #49
    FLight Attendant
    Join Date
    Dec 2010
    Posts
    37

    Default Re: Video: Homemade Fleshlight Warmer

    Just bought a personal steam inhaler, although, it is the Walgreens version (this it was only 20 bucks), but the dimensions and application are equivalent.

    I got two 3 inch to 4 inch PVC, cleaned them (I'd say this is important, as they are pretty nasty when you get them from the hardware store and the steam will potentially carry up some of the grime into your FL).

    They were a bit wider than the actual steam inhaler and thus was smooth plastic on smooth PVC, so I got some magic wrap (rubber backing) and used 100% water proof gorilla glue (I marked where I needed the strips with a sharpie) to put the rubber backing into place where the coupling would lay on the steam inhaler (so no sliding).

    The two 3 inch to 4 inch PVC couplings give about 5 inches of height from the tip of the steam inhaler.

    Now to test it out!

  50. #50
    FLight Attendant
    Join Date
    Dec 2010
    Posts
    37

    Default Re: Video: Homemade Fleshlight Warmer

    Wish the option to edit was a tad longer, forgot to mention that instead of getting a 1/2 inch PVC pipe, I got some sort of 1/2 inch PVC cap (but without blocking off one end, looks like something that screws on with a octagonal shape on one end), only cost 50 cents and no cutting involved, which means no rough edges to damage the insert.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top